Sign up for our newsletter
Subscribe to our emails
Shop All American Bass Car Audio Products
-
American Bass Godfather 1000.2D Class D High Performance Multichannel Amplifier
Description Specifications Godfather 1000.2D Class D Multichannel Car Audio Amplifier SKU: GF-1000.2D Introducing the American Bass Godfather Amplifier, a compact powerhouse designed for car audio enthusiasts seeking an offer they can't refuse. This Class D, linkable/dual mono block amplifier is packed with customizable features like variable subsonic, low pass filters, and bass boost controls, while its wired remote control and clipping indicator ensure you're always in command. Its multi-way protection circuitry keeps your audio build safe from DC, speaker short, thermal, and voltage threats. Rule the streets and elevate your car audio experience with this small yet mighty wiseguy, because in the world of sound, it's not personal; it's just business. NO OF CHANNELS 2 CHANNEL CONGIGURATION FULL RANGE DIGITAL 4OHM RMS POWER 400W x 2 2OHM RMS POWER 600W x 2 1OHM RMS POWER na 4OHM MONO POWER 1300W x 1 FREQUENCY RESPONSE 10Hz - 38Hz SIGNAL TO NOISE RATIO 85Db EFFICIENCY @ 4OHM OVER 70% DAMPING FACTOR 150< INPUT SENSITIVITY 6V - 0.2V SUBSONIC FILTER na LOW PASS FILTER 50Hz - 8000Hz MULTIPLY (X1, X10) 500Hz - 8KHz HIGH PASS FILTER 20Hz - 800Hz MULTIPLY (X1, X10) 200Hz - 8KHz BASS BOOST @45HZ na THD @ 4OHM <0.1% FUSE RATING 100A DIMENSIONS (LxWxH) 11.82L x 7.15W x 2.33H inches Support Specification Sheet (PDF)
$876.37 $370.27
-
$801.37
-
American Bass 6.5-Inch Black Beauty Cap
This 6.5-inch American Bass beauty cap is made from durable woven-black material, shielding your sub woofer from dust and debris while maintaining clean and consistent sound.
$10.00
-
6-Inch Black Pressure Dust Cap
This 6-inch pressure dust cap is made from durable woven-black material, shielding your sub woofer from dust and debris while maintaining clean and consistent sound.
$10.00
-
VFL Audio 7-Inch Black Woven Beauty Cap
This 7-inch VFL Audio beauty cap is made from durable woven-black material, shielding your sub woofer from dust and debris while maintaining clean and consistent sound.
$10.00
-
American Bass 7-Inch Black Beauty Cap
This 7-inch American Bass beauty cap is crafted from durable woven-black material, shielding your sub woofer from dust and debris while maintaining clean and consistent sound.
$10.00
-
American Bass 6-Inch Black Carbon Beauty Cap
This 6-inch American Bass carbon beauty cap is crafted from rigid black carbon material, shielding your subwoofer from dust and debris while maintaining clean and consistent sound.
$20.00
-
American Bass 8.5-Inch Black Beauty Cap
This 8.5-inch American Bass beauty cap is crafted from durable woven-black material, shielding your sub woofer from dust and debris while maintaining clean and consistent sound.
$10.00
-
American Bass 6-Inch Black Beauty Cap
This 6-inch American Bass beauty cap is crafted from durable woven-black material, shielding your sub woofer from dust and debris while maintaining clean and consistent sound.
$10.00
-
VFL Audio 6-Inch Black Beauty Cap
This 6-inch VFL Audio beauty cap is made from durable woven-black material, shielding your sub woofer from dust and debris while maintaining clean and consistent sound.
$10.00
-
4.5-Inch Black Flat Pressure Dust Cap
This 4.5-inch flat pressure dust cap is made from durable woven-black material, shielding your sub woofer from dust and debris while helping maintain clean and consistent sound.
$10.00
-
American Bass 5-Inch Black Beauty Cap
This 5-inch American Bass beauty cap is made from durable woven-black material, shielding your sub woofer from dust and debris while helping maintain clean and consistent sound.
$10.00
-
5-Inch Black Pressure Dust Cap
Protect your sub woofer with this 5-inch pressure dust cap. Made from durable woven-black material.
$10.00
-
American Bass 4.75-Inch Black Beauty Cap
American Bass 4.75-Inch Black Beauty Cap Protect your subwoofer investment with this genuine American Bass beauty cap, engineered from premium woven-black material. Designed to shield your driver from dust, debris, and environmental contaminants, this cap maintains acoustic integrity while preserving the clean, consistent sound quality your system demands.
$10.00
-
Falcon Series 6.5" Midrange Speaker | 300 Watts
Description Specifications The Falcon Series 6.5" Midrange Speaker is designed for serious audio enthusiasts seeking high output and clear sound. With a powerful 600W max power handling and 1.5” high-temperature voice coil, this speaker delivers clean, accurate sound reproduction across a wide frequency range of 150 Hz to 18,000 Hz. Built with a high-grade ferrite magnet and CCAW voice coil wire, the Falcon 6.5 ensures durability and high efficiency. Its 97 dB sensitivity allows it to produce loud and clear sound even with moderate power input, making it ideal for high-SPL car audio systems or pro audio setups. Nominal Diameter: 8 Inch Max Power Handling: 600 W RMS Power Handling: 300 W Frequency Response: 150 Hz-18000 Hz Nominal Impedance: 4 Ω Sensitivity: 97 dB Magnet: High Grade Ferrite Voice Coil Diameter: 1.5” Voice Coil Wire: CCAW Overall Diameter: 6.6” (167.0mm) Front Mount Baffle Cutout: 5.7” (146.0mm) Mounting Depth: 3.4” (87.0mm) Overall Depth: 3.7” (93.0mm) Support Specification Sheet (PDF)
$105.00 $71.40
-
Biker Series 8" Midrange Speaker | 400 Watts
Eight Inches of Open-Air Authority. When 6.5s aren't enough cone area to push sound past the windshield, you go to 8. The Biker Series 8 is built for riders running lower fairing pods, custom saddlebag enclosures, or trike installs that need real midrange output — not a glorified door speaker bolted to a bike. Same carbon fiber cone, same 1.5" CCAW voice coil, same 400W RMS rating as the rest of the series — but with the extra cone area to move air where smaller drivers run out of headroom. 96 dB sensitivity and a 70 Hz – 18 kHz frequency range mean this speaker fills in the lower mids that the 6.5 can't reach, giving kick drums weight and male vocals body. Run it as a dedicated midrange in a three-way bagger build, or as a full-range driver in a tighter system. Either way, it gets loud, stays clean, and survives the season. Key Features 400W RMS / 800W Max power handling Carbon fiber cone for stiffness and speed 1.5" CCAW voice coil — high power, low mass High-grade ferrite magnet Rubber surround for long-haul durability 4Ω nominal impedance 96 dB sensitivity Wider 70 Hz – 18 kHz frequency response Fits: 8" fairing pods, lower kits, custom saddlebag enclosures, and trike applications with a 7.3" cutout and 3.3" mounting depth. Specifications Nominal Diameter: 8" Max Power Handling: 800W RMS Power Handling: 400W Frequency Response: 70 Hz – 18,000 Hz Nominal Impedance: 4Ω Sensitivity: 96 dB Magnet: High-Grade Ferrite Voice Coil Diameter: 1.5" Voice Coil Wire: CCAW Cone Material: Carbon Fibre Surround Material: Rubber Overall Diameter: 8.3" (210.0 mm) Front Mount Baffle Cutout: 7.3" Mounting Depth: 3.3"
$139.00 $94.52
-
AB-CLR-3X 3-Way Active Electronic Crossover with Subwoofer Level Control
Description Specifications The AB-CLR-3X is a high-performance 3-way active crossover engineered for serious car audio systems. It provides independent crossover adjustment for front, rear, and subwoofer channels, allowing precise control over frequency separation, phase alignment, and output levels. With its remote subwoofer level control and clean signal path, this unit is ideal for advanced multi-amp and competition-level sound systems. Power Source 14.4 volts DC (negative ground) Input Current 0.5 A max Distortion (THD) 0.01% at 1V Frequency Response 10 Hz – 30 kHz (–3dB) Signal-to-Noise Ratio >100 dB Channel Separation 60 dB Crossover Slope 18 dB/octave, 3rd order Butterworth Input Impedance 20 kΩ Output Impedance 100 Ω Output Gain 1:2 (+6 dB) Output Voltage Level 5 V max Dimension 152mm x 180mm x 43mm Support Specification Sheet (PDF)
$129.00 $109.65
-
Falcon Series 8" Midrange Speaker | 300 Watts
Description Specifications The Falcon Series 8" Midrange Speaker is a powerful and efficient speaker built for audio enthusiasts who demand clarity and loud output in their midrange frequencies. Rated at 600 watts max power and 300 watts RMS, it is engineered to deliver impressive performance in both pro audio and car audio applications. This speaker features a 1.5” high-temperature CCAW voice coil, paper cone, and cloth surround, ensuring accurate sound reproduction with low distortion. With an exceptionally high sensitivity rating of 98.5 dB, the Falcon 8 can produce loud and clear sound with less power, making it perfect for SPL setups or custom installations. Nominal Diameter: 8 Inch Max Power Handling: 600 W RMS Power Handling: 300 W Frequency Response: 105 Hz - 18000 Hz Nominal Impedance: 4 Ω Sensitivity: 98.5 dB Magnet: High Grade Ferrite Voice Coil Diameter: 1.5” Voice Coil Wire: CCAW Overall Diameter: 8.2” (209.2 mm) Cone Material: Paper Surround Material: Cloth Front Mount Baffle Cutout: 7.2” (182.0 mm) Mounting Depth: 3.8” (97.0 mm) Overall Depth: 4.1” (104.0 mm) Support Specification Sheet (PDF)
$118.00 $80.24
-
Biker Series 6x9 Midrange Speaker | 400 Watts
Maximum Cone Area. Zero Compromise. The 6x9 is the loudest, most efficient speaker in the Biker Series — and the right call when you want the cone surface of an 8" driver in an enclosure that won't fit a round 8. With 96.5 dB sensitivity, this is the most efficient speaker in the lineup, meaning every watt your amp puts out turns into more SPL at the rider's ears. That matters at highway speeds. It matters even more in a group ride. Same proven Biker Series architecture — carbon fiber cone, 1.5" CCAW voice coil, ferrite motor, rubber surround — engineered for the heat, vibration, and weather that kills lesser drivers in one season. 400W RMS handling gives you real headroom to run it hard. Drop a pair in a lower fairing pod, custom bag lid, or a trunk-mount setup and you've got the foundation of a bike system that actually competes with the cars next to you at the light. Key Features 400W RMS / 800W Max power handling 96.5 dB sensitivity — highest in the Biker Series Carbon fiber cone, rubber surround 1.5" CCAW voice coil High-grade ferrite magnet 4Ω nominal impedance 70 Hz – 18 kHz frequency response Fits: Standard 6x9 motorcycle enclosures, fairing lowers, custom bag lids, and trunk pods with an 8.6" cutout and 3.5" mounting depth. Specifications Nominal Diameter: 6" x 9" Max Power Handling: 800W RMS Power Handling: 400W Frequency Response: 70 Hz – 18,000 Hz Nominal Impedance: 4Ω Sensitivity: 96.5 dB Magnet: High-Grade Ferrite Voice Coil Diameter: 1.5" Voice Coil Wire: CCAW Cone Material: Carbon Fibre Surround Material: Rubber Overall Diameter: 9.5" (241.0 mm) Front Mount Baffle Cutout: 8.6" (218.0 mm) Mounting Depth: 3.5" (89.0 mm)
$225.00 $153.00
-
Biker Series 6.5" Midrange Speaker | 400 Watts
Built for the Bagger. Tuned for the Wind. The Biker Series 6.5 is a sealed-back midrange driver engineered for motorcycle fairings, lids, and saddlebag enclosures — the kind of install that has to punch through wind noise, exhaust, and 70 mph air at a stoplight. We built it around a carbon fiber cone for stiffness without weight, a butyl rubber surround that holds up to UV and weather, and a 1.5" CCAW voice coil that handles 400 watts RMS all day without thermal collapse. 95 dB sensitivity means it gets loud without burning your amp. The 80 Hz – 18 kHz response delivers vocals, guitars, and snare with the bite riders actually want — not the dull, muddy output most factory bagger speakers settle for. Paired with a Biker Series amp and tweeters up top, this is the midrange backbone of a serious bike build. Key Features 400W RMS / 800W Max power handling Carbon fiber cone — stiff, light, fatigue-resistant 1.5" CCAW voice coil for high thermal capacity High-grade ferrite magnet, sealed motor structure Rubber surround built for the elements 4Ω nominal impedance 95 dB sensitivity Fits: 6.5" bagger pods, fairings, lower kits, and custom enclosures with a 5.7" cutout and 2.9" mounting depth.
$118.00 $80.24
-
VFL REBEL 8000.1 Class D High Performance Amplifier
Description Specifications VFL REBEL 8000.1 Car Amplifier SKU: REBEL-8000 Welcome to the top tier of audio warfare – the REBEL-8000.1 Amplifier is here to crush limits and redefine what power really means. Designed for elite systems and serious bass junkies, this amplifier unleashes an earth-shaking. From deep, bone-rattling lows to clean, chest-pounding highs, the REBEL-8000.1 delivers precision and punishment in equal measure. It’s not just an amp – it’s a full-blown assault on ordinary sound, engineered to make every note hit like a freight train. This is the amplifier that legends are built on. The REBEL-8000.1 doesn’t whisper – it roars. Ready to take your system to war? Join the rebellion and let your sound system rule the streets. RMS POWER @ 4 OHM 2090W x 1 RMS POWER @ 2 OHM 4300W x 1 RMS POWER @ 1 OHM 8000W x 1 Bass Boost Range 0 -12dB Bass Boost Frequency 30-70Hz Low Pass Filter 10Hz - 1KHz High Pass Filter (if applicable) 60Hz-20KHz Frequency Response 10Hz-20KHz Signal-to-Noise Ratio >91dB THD (Total Harmonic Distortion) <0.5% Input Sensitivity 0.4-4V Efficiency @ 4Ω 90% Fuse Rating 750A Amplifier Class (D or AB) CLASS D Amplifier Type Digital power amplifier Number of Channels 1 Channels Physical Dimensions (inches) 8.23 L X 8.66 W X 2.24 H Support Specification Sheet (PDF)
$695.00 $588.12
-
VFL REBEL-3000.1 Class D High Performance Amplifier
Description Specifications VFL Car Amplifier High Performance Class D Audio SKU: REBEL-3000.1 Prepare to dominate the streets with the REBEL-3000.1 Amplifier – a true force of power built for those who live loud and refuse to settle. This high-performance machine is engineered to push your system to its absolute limits, delivering massive output with razor-sharp clarity and control. Whether you're running subs or a full-range setup, the REBEL-3000.1 brings the heat with relentless intensity and zero compromise. Every drop, riff, and rumble hits harder, cleaner, and deeper – turning every ride into a front-row concert experience. It’s not just about loud – it’s about legendary. The REBEL-3000.1 is here to ignite your system and lead the charge. Join the rebellion and feel the power like never before! RMS POWER @ 4 OHM 980W x 1 RMS POWER @ 2 OHM 1905W x 1 RMS POWER @ 1 OHM 3000W x 1 Bass Boost Range 0 -12dB Bass Boost Frequency 30-70Hz Low Pass Filter 60Hz - 20KHz High Pass Filter (if applicable) 10Hz - 1KHz Frequency Response 10Hz-20KHz Signal-to-Noise Ratio >90dB THD (Total Harmonic Distortion) <0.35% Input Sensitivity 0.4 - 4V Efficiency @ 4Ω 90% Fuse Rating 80A Amplifier Class (D or AB) CLASS D Amplifier Type Digital power amplifier Number of Channels 1 Channels Total Peak Power Physical Dimensions (inches) 5.43 L X 5.9 W X 2.24 H Support Specification Sheet (PDF)
$438.90 $373.06
-
VFL REBEL-2400.4 Class D High Performance Amplifier
Description Specifications VFL REBEL-2400.4 Car Amplifier SKU: REBEL-2400.4 Step into the spotlight with the REBEL-2400.4 Amplifier – the perfect fusion of raw power and audio precision. Designed for serious sound lovers who crave volume without distortion, this 4-channel powerhouse brings out the full potential of your system with clean, punchy output across every note. From crystal-clear highs to chest-thumping lows, the REBEL-2400.4 drives your speakers with authority and style. It’s more than just an amp – it’s the heartbeat of your setup, pushing performance beyond limits and delivering sound that refuses to be ignored. Ready to take command of your audio game? The REBEL-2400.4 is here to fuel your ride with the sound of rebellion. Turn it up. Let it roar. RMS POWER @ 4 OHM 425W x 4 RMS POWER @ 2 OHM 640W x 4 RMS POWER @ 1 OHM n/a Bass Boost Range n/a Bass Boost Frequency n/a Low Pass Filter 20Hz - 200Hz High Pass Filter (if applicable) 700Hz - 7KHz Frequency Response 10Hz - 30KHz Signal-to-Noise Ratio <93dB THD (Total Harmonic Distortion) <0.1% Input Sensitivity 0.4-8V Efficiency @ 4Ω 90% Fuse Rating 200A Amplifier Class (D or AB) CLASS D Amplifier Type Digital power amplifier Number of Channels 1 Channels Total Peak Power Physical Dimensions (inches) 8.23 L X 5.91 W X 2.24 H Support Specification Sheet (PDF)
$495.00 $420.75
-
MX 250 Compression Super Tweeters, 150 Watts (Pair)
Description Specifications Discover the American Bass MX Bullet Tweeters for unmatched high-frequency audio performance in car systems. Featuring a precision-engineered motor and a rigid titanium alloy diaphragm for powerful, detailed sound. These tweeters integrate seamlessly with existing audio systems using the included in-line crossover. Elevate your listening experience with the extraordinary clarity and power of the MX Bullet Tweeters. IMPEDANCE 4 ohm MAX POWER 150 W SENSITIVITY(DB/M/W 105dB FREQUENCY RESPONSE 5k-15k Hz VOICE COIL 1" ccaw MAGNET 17 oz RECOMMENDED CROSSOVER 5.5k Hz
$55.57 $40.15
You have seen 48 out of 231 products
This is the full American Bass Audio product catalog — every subwoofer, amplifier, speaker, battery, and accessory we make, in one place.
American Bass and VFL Audio products are engineered for people who take car audio seriously. Whether you're building your first system or adding to a competition rig that already holds world records, everything here is built to the same standard: maximum output, real power handling, and performance that holds up under real-world conditions.
Browse everything below, or jump directly to a category — subwoofers, amplifiers, speakers, car audio batteries, recone kits, or wire and accessories. Not sure where to start? Use our Subwoofer Selector tool to get a personalized recommendation in under two minutes.