Motorcycle Speakers

Description Specifications The Falcon Series 8" Midrange Speaker is a powerful and efficient speaker built for audio enthusiasts who demand clarity and loud output in their midrange frequencies. Rated at 600 watts max power and 300 watts RMS, it is engineered to deliver impressive performance in both pro audio and car audio applications. This speaker features a 1.5” high-temperature CCAW voice coil, paper cone, and cloth surround, ensuring accurate sound reproduction with low distortion. With an exceptionally high sensitivity rating of 98.5 dB, the Falcon 8 can produce loud and clear sound with less power, making it perfect for SPL setups or custom installations. Nominal Diameter: 8 Inch Max Power Handling: 600 W  RMS Power Handling: 300 W  Frequency Response: 105 Hz - 18000 Hz Nominal Impedance: 4 Ω Sensitivity: 98.5 dB Magnet: High Grade Ferrite Voice Coil Diameter: 1.5” Voice Coil Wire: CCAW Overall Diameter:  8.2” (209.2 mm) Cone Material:  Paper Surround Material: Cloth Front Mount Baffle Cutout: 7.2” (182.0 mm) Mounting Depth: 3.8” (97.0 mm) Overall Depth: 4.1” (104.0 mm) Support Specification Sheet (PDF)

Read more less

Eight Inches of Open-Air Authority. When 6.5s aren't enough cone area to push sound past the windshield, you go to 8. The Biker Series 8 is built for riders running lower fairing pods, custom saddlebag enclosures, or trike installs that need real midrange output — not a glorified door speaker bolted to a bike. Same carbon fiber cone, same 1.5" CCAW voice coil, same 400W RMS rating as the rest of the series — but with the extra cone area to move air where smaller drivers run out of headroom. 96 dB sensitivity and a 70 Hz – 18 kHz frequency range mean this speaker fills in the lower mids that the 6.5 can't reach, giving kick drums weight and male vocals body. Run it as a dedicated midrange in a three-way bagger build, or as a full-range driver in a tighter system. Either way, it gets loud, stays clean, and survives the season. Key Features 400W RMS / 800W Max power handling Carbon fiber cone for stiffness and speed 1.5" CCAW voice coil — high power, low mass High-grade ferrite magnet Rubber surround for long-haul durability 4Ω nominal impedance 96 dB sensitivity Wider 70 Hz – 18 kHz frequency response Fits: 8" fairing pods, lower kits, custom saddlebag enclosures, and trike applications with a 7.3" cutout and 3.3" mounting depth. Specifications Nominal Diameter: 8" Max Power Handling: 800W RMS Power Handling: 400W Frequency Response: 70 Hz – 18,000 Hz Nominal Impedance: 4Ω Sensitivity: 96 dB Magnet: High-Grade Ferrite Voice Coil Diameter: 1.5" Voice Coil Wire: CCAW Cone Material: Carbon Fibre Surround Material: Rubber Overall Diameter: 8.3" (210.0 mm) Front Mount Baffle Cutout: 7.3" Mounting Depth: 3.3"

Read more less

Built for the Bagger. Tuned for the Wind. The Biker Series 6.5 is a sealed-back midrange driver engineered for motorcycle fairings, lids, and saddlebag enclosures — the kind of install that has to punch through wind noise, exhaust, and 70 mph air at a stoplight. We built it around a carbon fiber cone for stiffness without weight, a butyl rubber surround that holds up to UV and weather, and a 1.5" CCAW voice coil that handles 400 watts RMS all day without thermal collapse. 95 dB sensitivity means it gets loud without burning your amp. The 80 Hz – 18 kHz response delivers vocals, guitars, and snare with the bite riders actually want — not the dull, muddy output most factory bagger speakers settle for. Paired with a Biker Series amp and tweeters up top, this is the midrange backbone of a serious bike build. Key Features 400W RMS / 800W Max power handling Carbon fiber cone — stiff, light, fatigue-resistant 1.5" CCAW voice coil for high thermal capacity High-grade ferrite magnet, sealed motor structure Rubber surround built for the elements 4Ω nominal impedance 95 dB sensitivity Fits: 6.5" bagger pods, fairings, lower kits, and custom enclosures with a 5.7" cutout and 2.9" mounting depth.

Read more less

Maximum Cone Area. Zero Compromise. The 6x9 is the loudest, most efficient speaker in the Biker Series — and the right call when you want the cone surface of an 8" driver in an enclosure that won't fit a round 8. With 96.5 dB sensitivity, this is the most efficient speaker in the lineup, meaning every watt your amp puts out turns into more SPL at the rider's ears. That matters at highway speeds. It matters even more in a group ride. Same proven Biker Series architecture — carbon fiber cone, 1.5" CCAW voice coil, ferrite motor, rubber surround — engineered for the heat, vibration, and weather that kills lesser drivers in one season. 400W RMS handling gives you real headroom to run it hard. Drop a pair in a lower fairing pod, custom bag lid, or a trunk-mount setup and you've got the foundation of a bike system that actually competes with the cars next to you at the light. Key Features 400W RMS / 800W Max power handling 96.5 dB sensitivity — highest in the Biker Series Carbon fiber cone, rubber surround 1.5" CCAW voice coil High-grade ferrite magnet 4Ω nominal impedance 70 Hz – 18 kHz frequency response Fits: Standard 6x9 motorcycle enclosures, fairing lowers, custom bag lids, and trunk pods with an 8.6" cutout and 3.5" mounting depth. Specifications Nominal Diameter: 6" x 9" Max Power Handling: 800W RMS Power Handling: 400W Frequency Response: 70 Hz – 18,000 Hz Nominal Impedance: 4Ω Sensitivity: 96.5 dB Magnet: High-Grade Ferrite Voice Coil Diameter: 1.5" Voice Coil Wire: CCAW Cone Material: Carbon Fibre Surround Material: Rubber Overall Diameter: 9.5" (241.0 mm) Front Mount Baffle Cutout: 8.6" (218.0 mm) Mounting Depth: 3.5" (89.0 mm)

Read more less

Description Specifications The Falcon Series 6.5" Midrange Speaker is designed for serious audio enthusiasts seeking high output and clear sound. With a powerful 600W max power handling and 1.5” high-temperature voice coil, this speaker delivers clean, accurate sound reproduction across a wide frequency range of 150 Hz to 18,000 Hz. Built with a high-grade ferrite magnet and CCAW voice coil wire, the Falcon 6.5 ensures durability and high efficiency. Its 97 dB sensitivity allows it to produce loud and clear sound even with moderate power input, making it ideal for high-SPL car audio systems or pro audio setups. Nominal Diameter: 8 Inch Max Power Handling: 600 W  RMS Power Handling: 300 W  Frequency Response: 150 Hz-18000 Hz Nominal Impedance: 4 Ω Sensitivity: 97 dB Magnet: High Grade Ferrite Voice Coil Diameter: 1.5” Voice Coil Wire: CCAW Overall Diameter:  6.6” (167.0mm) Front Mount Baffle Cutout: 5.7” (146.0mm) Mounting Depth: 3.4” (87.0mm) Overall Depth: 3.7” (93.0mm) Support Specification Sheet (PDF)

Read more less

Description Specifications Stallion 8-Inch Midrange Car Speaker 400W RMS SKU: STALLION-8-MR Ride with the might of the Stallion, the American Bass USA's premium midrange speaker that's as fierce on the road as it is on the tracks. Whether it's the heart of your car's audio system or the soul of your motorcycle's sound, the Stallion gallops ahead with unmatched clarity and power. With muscular options of 700 and 800 watts max in 6.5" and 8" sizes, these speakers flex a 2" coil and a high-grade neo magnet, ensuring your music not only plays but charges through every journey.  RMS POWER 400W MAX POWER 800W IMPEDANCE (OHMS) 4 SENSITIVITY DB 99.5 MOUNTING DEPTH (IN) 3.1 CUTOUT SIZE (IN) 7.3 PORTED BOX (FT3) 100Hz-8000Hz VOICE COIL SIZE 2 BASKET TYPE CAST Support Specification Sheet (PDF)

Read more less

Description Specifications Stallion 6.5″ Midrange Car Speaker SKU: STALLION-6.5-MR Ride with the might of the Stallion, the American Bass USA's premium midrange speaker that's as fierce on the road as it is on the tracks. Whether it's the heart of your car's audio system or the soul of your motorcycle's sound, the Stallion gallops ahead with unmatched clarity and power. With muscular options of 700 and 800 watts max in 6.5" and 8" sizes, these speakers flex a 2" coil and a high-grade neo magnet, ensuring your music not only plays but charges through every journey.  RMS POWER 350W MAX POWER 700W IMPEDANCE (OHMS) 4 SENSITIVITY DB 98.5 MOUNTING DEPTH (IN) 2.7 CUTOUT SIZE (IN) 5.9 PORTED BOX (FT3) 120Hz-10000Hz VOICE COIL SIZE 2 BASKET TYPE CAST Support Specification Sheet (PDF)

Read more less